Skip to main content

Window Screen Cleaning in Lamy

Screens out here take a constant load of fine wind-driven grit, and on older properties the screen frames themselves are often original and fragile. We remove, hand-wash, rinse, and reinstall each one, working carefully with aged frames.

Old wooden screen frames and original hardware don't tolerate being flexed or pressure-washed. We wash these flat and by hand rather than propping and hosing them, which is how old frames get racked out of square.

What's Included

  • Careful removal of all screens
  • Hand-washing with soft brush and cleaning solution
  • Thorough rinse to remove all soap, dust, and debris
  • Inspection for torn mesh or damaged frames
  • Proper reinstallation — every screen back where it belongs
  • Available as part of the 5-in-1 Scrub Down bundle

Continuous grit, not seasonal

Open grassland with almost nothing to break the wind means Lamy screens take airborne grit steadily through the dry months rather than in bursts. Screens that are never cleaned become a standing dust reservoir directly in front of the glass, so every gust pushes some of it through onto a window that was cleaned last week. Cleaning the glass without cleaning the screen is close to pointless here.

Older screens need careful handling

Much of the housing stock is older, and so is much of the screening — wood frames, aged spline, mesh that has been in place for decades. Those do not survive rough treatment. We remove each one carefully, hand-wash with a soft brush rather than pressure, rinse until clear, and check the frame and mesh condition, telling you plainly if a screen is past the point where cleaning helps.

Pricing

Screen cleaning is $3 per screen, or bundled in the 5-in-1 Scrub Down starting at $100.

Get your screens price for Lamy in seconds.

Common Questions

No — we wash aged frames flat and by hand rather than pressure-washing or propping them, which is what racks old frames out of square.

Two to three times a year given how continuous the grit load is.

We'll flag torn mesh or failed frames rather than forcing them. We don't do repairs but we'll tell you exactly what we found.